Unit Information - Omron WE70-AP Operation Manual

Chapter 5. Setup Menu
● Unit information
This screen displays radio intensity and communication speed during data communication.
(1) AID .................................... Indicates an access point as "0" and clients as 1 to 63.
(2) RSSI.................................. Indicates a Received Signal Strength Intensity from a terminal.
(3) Reception rate ................. Indicates a received data speed from a terminal.
(4) MAC address ................... Indicates a terminal MAC address (wireless end) of a client (slave) and a
5
● SYSLOG
This screen displays history of startup and connection.
Trigger Conditions Displayed
in SYSLOG (Categorized)
Wireless LAN
Wireless Terminal Connected
Wireless Terminal Disconnected
Administrator IP Limitation
Connection Refusal
On Start-Up
Version
HTTP Server Startup
Startup Completed
5-14
(1) (2)
As an access point sends a beacon signal every 100ms, the beacon sig-
nal is sent in an interval of communication even while data communica-
tion is being performed. Momentary receiving rate is displayed as 6Mbps
or 1Mbps. Beacon transmission speed is 6Mbps for 11a and 1Mbps for
11b/g.
BSSID of an access point.
Message in SYSLOG
join wireless terminal (XX:XX:XX:XX:XX:XX)
remove wireless terminal (XX:XX:XX:XX:XX:XX)
refused connect from XXX.XXX.XXX.XXX
root : WE70-AP Ver. x.xx
httpd : thttpd starting on port 80
root : System is ready
(3) (4)
Remarks
XX:XX:XX:XX:XX:XX indicates a MAC address
XXX.XXX.XXX.XXX indicates an IP address
x.xx indicates version information
AP