Dimensions; Installation Method - Omron WE70-AP Operation Manual

■ Dimensions

(Common with WE70-AP/CL)
For WE70-CL Only
34.5 ± 0.5
36

■ Installation Method

● Mounting Magnets
Mounting magnets allows
temporary installation and easy
move for setup and testing before
actual operation.
Mount magnets using screws as
shown in the right.
● To Mount Using Mounting
Bracket
Attach the mounting bracket on
accessory magnets which are
installed on a wireless unit.
Installation on a control panel
requires screw hole drilling.
Installation with magnets cannot be used at the location with excessive vibration. Use the mounting bracket or DIN
Caution
rail adapter in that case.
WE70-AP
FA WIRELESS LAN ACCESS POINT
POWER MODE LAN WIRELESS
120 ± 1.0
Flat-head screw
(Accessory)
Mounting screws for this wireless
unit must be tightened with torque of
4.4 to 5.3in. lb. (0.5 to 0.6N.m)
Chapter 2. Installation & Connection
(Unit: mm)
Flat-head screw (Accessory)
Magnet (Accessory)
Mounting screws for this wireless unit
must be tightened with torque of 4.4 to
5.3in. lb. (0.5 to 0.6N.m)
Tighten using screws at the mounting holes
Screw Mounting
Bracket (Accessory)
108 ± 0.1
Mounting Hole Dimensions
(unit mm)
2
Tapping Screw
(Accessory)
4 – M5
2-5