Step 2. Configuring Wireless Network Name (Ssid) - Omron WE70-AP Operation Manual

Chapter 3 Basic Setup

Step 2. Configuring Wireless Network Name (SSID)

This section describes how to change a wireless network name (SSID).
● Wireless Network Name (SSID)
An access point and a client (slaves) have SSID (or ESS ID) as wireless network names to identify each
other for communication.
If more than one wireless routers or access points exist in one wireless communication zone, cross talk
with other wireless network group can be prevented by identification using different SSID (wireless
network name) for each wireless network group.
A wireless LAN terminal with a SSID different from a wireless unit cannot communicate.
* If ANY-connection refusal setup is being disabled for an access point, and if a SSID of a client (slave) is blank, the client (slave) can
communicate with the access point regardless of access point SSID setup.
3
1.
3.
2.
1.
3.
2.
3-8
<To Configure>
(1) Open a setup screen of the wireless unit (see Chapter 2-3. Connection
Check, Opening Setup Screen (P.2-13)) and click Wireless settings
menu.
• A Wireless settings screen is displayed.
(2) Enter the desired alphanumeric characters in SSID (within 31 characters)
with the attention for capitalization.
(Initial value: omronwe70wlan)
(3) Click <Apply and restart>.
* If a wireless LAN terminal is used for setup, switch the connection to the SSID configured
here.
Screen of WE70-AP
Click
Click
Enter
Screen of WE70-CL
Click
Click
Enter