BHT-1170BWB-CE / BHT-1171BWB-CE
2.1 "BHT Preparation" Procedure
Follow the steps below to prepare the BHT.
2.2 Loading and Charging the Battery
(Page 14)
2.3 Attaching the Stylus
(Page 19)
2.4 Initial Setup
(Page 21)
2.2 Loading and Charging the Battery
The battery is not charged when purchased and should therefore be charged prior to use.
The chargers that can be use with the BHT are the CU.
The charge time is approximately 3 hours (standard rechargeable battery) or 4.5 hours
(large-capacity rechargeable battery).
An only slightly discharged battery should take less time to become fully charged.
Charging Precautions
• Do not touch the BHT, battery, or charger terminals by hand or stain them. Doing so could result
in a contact failure or prevent charging.
• Never charge the battery near fire or in a high-temperature environment.
High-temperatures may activate the charger's protective device, preventing charging, and lead
to protective device damage, overheating, blowout or combustion.
• Terminate charging if not completed even after the specified time has elapsed.
12
First load and charge the battery.
Attach the stylus to prevent it from being lost.
Calibrate the touch screen and set the calendar clock
when the power is turned ON for the first time.