Charging The Bht And The Spear Battery; Charging The Bht - Denso BHT-1170BWB-CE User Manual

9.5 Charging the BHT and the Spear battery

9.5.1

Charging the BHT

The battery is charged while loaded in the BHT.
− Note −
Perform charging after turning OFF the BHT.
While turning ON the BHT, charge time sometimes becomes long.
− Note −
Battery Service Life
The capacity of the lithium-ion battery used in the battery will gradually deteriorate during the
repeated cycles of charging and discharging, even under normal use. Replace the battery with a
new one if the power consumption period becomes shorter even after charging for the specified
length of time. Generally, battery replacement is early time of required after approximately 300
cycles of charging and discharging or one year later.
1.
Turn ON the CU power.
The Power/Communications LED illuminates in green.
2.
Turn OFF the BHT power before placing on the CU.
The Indicator LED on BHT illuminates in red and charging is commenced.
Charging Time
Standard rechargeable battery (BT-110LA)
Large-capacity rechargeable battery
The Indicator LED on BHT turns green when charging is complete.
3.
Remove the BHT from the CU.
Barcode Handy Terminal
Approx. 3 hours
Approx. 4.5 hours
161