Memory Contents After Reset/Full Reset; Reinstall/Recovery Methods Of Data After Reset/Full Reset - Denso BHT-1170BWB-CE User Manual

2.6.5 Memory Contents after Reset/Full Reset

Data in the "FLASH" folder
(on-board FLASH memory)
Data in the "Storage Card" folder
(SD Card)
Data in other folders
Contents of the Registry
Data being edited
(Note) If the Registry has been backed up (Refer to "Chapter 2 BHT Preparation" – "2.5 Turning OFF the
Power".), the backed up Registry will be used.

2.6.6 Reinstall/Recovery methods of data after Reset/Full reset

When performing full reset, all data and information excluding on-board FLASH memory and MicroSD card
folders will also be lost. It requires to reinstall applications, reset registry, or recovery of application or registry.
Those methods can be performed smoothly by selecting the functions described below. Follow the steps
below in order, implementing from function [1] for full reset, function [5] for reset, respectively when rebooting.
When skipping reinstall and recovery methods of data after reset/full reset with the following procedures, all
data including files and settings stored in the RAM will also be lost and the RAM will revert to the factory
default.
- Press full reset key combination (M1 + M2 + Left Trigger + Power) + SCAN key
- Press SCAN key when the power is turned ON ("Working" displays)
Memory contents are erased except FLASH and SD Card folder. The registry is also being lost.
(Refer to "Chapter 2 BHT Preparation" – "2.6.5 Memory Contents after Reset / Full reset")
Refer to "Chapter 4 System Operation" – "4.4.3 System Properties [3] File System" for details of how to return
the Registry to its default status.
Refer to "Chapter 4 System Operation" – "4.4.3 System Properties [7] Data Backup and [8] Startup
Configuration" for details of how to config the following settings.
Barcode Handy Terminal
Reset Full Reset
Data retained Data retained
Data retained Data retained
Data retained Data erased
Data retained Data erased
Data erased Data erased
(Note)
23