Cu-1100 Power Supply - Denso BHT-1170BWB-CE User Manual

BHT-1170BWB-CE / BHT-1171BWB-CE

9.3 CU-1100 Power Supply

Power for the CU is supplied from a wall socket via the dedicated AC adapter.
Connect the outlet plug of the AC adapter to the power inlet connector of the CU, and then plug the other end into the
wall socket.
Mishandling of the CU may result in electric shock, overheating or smoke generation. Please read
the following items prior to use.
Never disassemble or modify the CU.
Never place the CU in a microwave oven or high-pressure container.
Never use the CU if smoke, abnormal noises or odors are being emitted.
If any of the above abnormalities occur, immediately unplug the AC adapter.
If foreign material or water gets into the CU, immediately unplug the AC adapter from the wall
socket or CU.
If the CU housing is damaged after being dropped, immediately unplug the AC adapter from the
wall socket or CU.
Never use the CU to charge a battery other than the stipulated battery.
Never connect the output terminals with metal objects and so on.
Use the dedicated AC adapter only.
Never use the CU on the line voltage other than that specified.
Never use the AC adapter if the power cord is damaged (e.g., exposed or broken lead wires).
158
AC adapter Power inlet connector