Performing A Ping Test - Denso BHT-1170BWB-CE User Manual

4.5.8 Performing a Ping test

Tap the "Ping" tabbed page at the Wireless LAN menu to display the
screen on the right.
Destination IP or Name: Specifies the IP address or name of the
Tap the [Setting] button to set the Ping parameters.
Tap the [Start] button to commence the Ping test.
The host name of the BHT is "Device name" in control panel - System - Device Name
− Note −
tabbed page. "Device name" must be changed from default "BHT" to another device
name when ping with host name from remote system is implemented.
If "Device name" is default ("BHT"), ping from remote system can not find the BHT.
Ping result
The screen on the right displays when the Ping test is commenced.
Count: Number of echo requests sent
OK: Number of echo replies
NG: Number of errors that occurred while
performing the Ping test
Timeout: Number of timeouts (for echo requests)
that occurred while performing the Ping test
RTT Ave.(ms): Echo reply time
Select the [List] button to switch the Ping result screen.
Tap the [Save] button to save the Ping result into the file.
Tap the [Clear] button to clear the Ping result.
host computer to be pinged.
Barcode Handy Terminal
103