System Errors - Denso BHT-1170BWB-CE User Manual

BHT-1170BWB-CE / BHT-1171BWB-CE

7.1 System Errors

The error messages that display on the screen and the causes and countermeasures to be taken if an error occurs
when the power is turned ON or while running a program are shown below. The error message is displayed by the
application language in the specific country.
Message
146
BHT Response
The beeper sounds 5 System program
times (each beep lasts abnormality
for 0.1 seconds) and
then the power turns
OFF.
The BHT displays a The battery voltage has
warning for dropped to a level that
approximately 2 seconds requires charging or
while sounding the battery replacement
beeper 3 times (each when turning the BHT
beep lasts for 0.1 ON, OFF or while
seconds) before running a program.
returning to its normal
operational status.
The beeper sounds 5 The battery voltage has
times (each beep lasts dropped to a level that
for 0.1 seconds) and prevents BHT operation
then the power turns when turning the BHT
OFF. Depending on the ON, OFF or while
battery consumption running a program.
status, the beeper may
not sound 5 times.
Cause Countermeasure
Notify the system
administrator.
The battery will soon
need charged.
Replace or charge the
battery promptly.
If the BHT is left with
the battery discharged,
data including files and
settings stored in the
RAM may be lost.
Replace or charge the
battery immediately. If
the BHT is left with the
battery discharged,
data including files and
settings stored in the
RAM may be lost.