Wireless Network Settings; Wireless Lan Menu; Displaying The Wireless Module Version And Current Connection Status, And Opening/Closing The Wireless Device - Denso BHT-1170BWB-CE User Manual

BHT-1170BWB-CE / BHT-1171BWB-CE

4.5 Wireless Network Settings

4.5.1 Wireless LAN Menu

Double-tap "Wireless LAN" at the System Properties screen to display
the screen on the right.
This menu can be used to perform the following processes.
• Displaying the wireless module version and current connection
status, and opening/closing the wireless device
• Displaying the IP address and MAC address
• Setting the wireless LAN options
• Editing the profiles
• Displaying the current communication status
• Performing a Ping test
4.5.2 Displaying the Wireless Module Version
and current connection status, and Opening/Closing the Wireless
Device
Tap the "Information" tabbed page at the Wireless LAN menu to display
the screen on the right. This menu displays the following information.
Wireless Module Version
Driver Version:
Firmware Version: Wireless module firmware version
Status
Active Profile:
Status:
BSSID:
Signal Strength:
Channel:
IP Address
Select Profile
− Note −
It may be different between Active Profile and Select Profile. To change Active Profile,
select profile and tap the [Apply] button.
Also, the displayed active profile is not refleshed immediately, even if the profile is changed
by other application and refresh the profile after re-open wireless device with [Close] -
[Open] button.
Furthermore, wireless devices can also be opened and closed by tapping the [Open] and [Close] buttons.
− Note −
If the wireless device is opened by tapping [Open], the device remains continuously open
even if the Wireless LAN menu is closed. To close the wireless device, open this menu
again and tap the [Close] button.
90
Wireless driver version
Active Profile
Current connection status
Current BSSID
Current signal strength
Current communication channel
BHT IP Address
Select profile to connect the access point