2.3 Attaching the Stylus
Attach the stylus to the hand belt to prevent it from being lost.
2.3.1 Attaching the Stylus
Attach the stylus as shown below.
2.3.2 Holding the BHT
Insert your hand into the hand belt and hold the BHT as shown below.
2.3.3 Using the Stylus
The BHT liquid crystal display (LCD) is a touch screen.
Buttons, menus and so displayed on the screen can be
selected using the stylus provided.
Always perform touch screen calibration before operating
the touch screen.
(Refer to "Chapter 2 BHT Preparation" – "2.4 Initial Setup".)
Barcode Handy Terminal
17