Wireless Network Settings; Wireless Lan Menu; Information Menu - Denso BHT-1260BWB-CE User Manual

BHT-1200 Series

4.5 Wireless Network Settings

4.5.1 Wireless LAN Menu

"Wireless LAN" is a wireless LAN setup tool called the "Wlan Manager",
and is used to connect the BHT via a wireless network and check the
network information.
To open the Wlan Manager, double tap the "Wireless LAN" icon in the
System Properties.
The Wlan Manager provides the following menus.
Information:
Network:
Settings:
Profiles:
Link:
Ping:

4.5.2 Information menu

Tap the "Information" tab in the Wlan manager.
The following information is displayed.
Version:
Driver:
Firmware:
Region code: Country code (country name, standards organization)
Status:
Active Profile:
Status:
BSSID:
Signal Strength:
Channel:
IP Address
"Open" button:
"Close" button:
 Note 
The wireless device opened by the "Open" button remains open even after the Wlan
manager is closed. To close the wireless device, open this menu again and tap the
"Close" button.
120
Displays the wireless device information, and
connection status.
Displays network information, and sets up the IP
address and the name servers.
Sets up the power save mode, radio mode and
advanced settings.
Edits the network profiles
Displays the current communication status
Performs a Ping test
Wireless driver version
Wireless module firmware version
Current active profile
Current connection status
Current BSSID
Current signal strength
Current communication channel
BHT IP Address
Opens the wireless device by tapping
Closes the wireless device by tapping