Auto Dial - Mitel 5340 User Manual

Auto Dial

When a Cordless Module is installed and at least one Mitel-branded device is paired, the
Auto Dial feature is available in the Settings menu. You can program a number that is
automatically dialed when a cordless device hookswitch button is pressed.
To program an Auto Dial number:
1. Press the blue Menu
2. Press Auto Dial, and then press Edit Number.
3. In the on-screen keyboard, enter the autodial number.
4. Press Save.
5. Press Edit Label.
6. In the on-screen keyboard, enter the appropriate information.
7. Press Save and then press Close.
To disable Auto Dial:
1. Press the blue Menu
2. Press Auto Dial.
3. Press Disable Auto Dial. The Auto Dial settings you have programmed are maintained
when the feature is disabled.
4. Press Save.

To re-enable, repeat steps 1 and 2 and then press Enable Auto Dial.

To change Auto Dial information, press Edit Number and/or Edit Label.

Press Save to save all changes.
Mitel 5330 and 5340 IP Phones User Guide
key, and then press Settings.
key, and then press Settings.
- 87 -