Hang Up; Dialing - Auto Dial Disabled; Dialing - Auto Dial Enabled; Headset Alerting Tones And Leds - Mitel 5340 User Manual

Hang Up

Do one of the following:

Replace the cordless headset in the cradle.

If the headset is already out of the cradle, press the hookswitch button on the headset.
Dialing – Auto Dial Disabled
To dial a number with Auto Dial disabled:
1. Lift the headset or press the hookswitch.
2. Make the call using the dial pad, or press a programmed speed dial key on the phone.
Dialing – Auto Dial Enabled
To dial with Auto Dial enabled:

To dial the predefined Auto Dial number, press the hookswitch on the cordless handset
or headset.
To program Auto Dial, refer to

Headset Alerting Tones and LEDs

The cordless headset provides the following alerting tones:
Feature
Mute ON/OFF
Mute key on Phone ON/OFF
Low battery (within 10 minutes left)
Low battery (within 2 minutes left)
Out of range
Mitel 5330 and 5340 IP Phones User Guide
Auto Dial on page 83.
2-pitch tone occurs immediately. Reminder tone occurs 30
seconds after activation and then regularly until deactivated.
No immediate tone. Reminder tone occurs 30 seconds after
activation and then regularly until deactivated.
3 beeps and 20 second pause
3 rapid beeps and 1.5 second pause
Repetitive 3-pitch tone until you are back in range. Note: If
you are out of range for more than 10 seconds, any call that
is in progress is dropped and not recovered.
- 81 -
Function