System Power Control Menu - IBM H80 User Manual

System Power Control Menu

This menu is used to set power control options. Other menus that control boot options
are available here:
1. Enable/Disable Unattended Start Mode:
2. Ring-Indicate Power-On Menu
3. Reboot/Restart Policy Setup Menu
4. Power-On System
5. Power-Off System
6. Enable/Disable Fast System Boot
7. Boot Mode Menu
98. Return to Previous Menu
99. Exit from Menus
1>
v Enable/Disable Unattended Start Mode
Use this option to instruct the service processor to restore the power state of the
server after a temporary power failure. Unattended start mode can also be set
through the System Management Services (SMS) menus. It is intended to be used
on servers that require automatic power-on after a power failure. For more
information, see "System Power-On Methods" on page 45.
v Ring-Indicate Power-On Menu
30. Refresh Modem Settings
98. Return to Previous Menu
Ring-indicate is enabled by default on both serial port 1 (S1) and serial port 2 (S2).
When ring-indicate power-on is enabled, call-in is disabled.
If ring-indicate power-on is enabled and call-in is already enabled, you will be asked
to confirm your choice. Refer to the message displayed on your screen.
If the ring-indicate power-on setting is changed, you must select option 30 (Refresh
Modem Settings) to update the modem settings. If option 30 (Refresh Modem
26
User's Guide
SYSTEM POWER CONTROL MENU
Currently Enabled
Currently Enabled
RING-INDICATE POWER-ON MENU
1. Ring-indicate power-on :
Currently Enabled
2. Number of rings:
Currently 3