Configure Remote Maintenance Policy - IBM H80 User Manual

When enabled, 'Unattended Start Mode' allows the system to recover from the loss
of ac power.
If the system was powered-on when the ac loss occurred, the system reboots when
power is restored. If the system was powered-off when the ac loss occurred, the
system remains off when power is restored.
You can access this service aid directly from the AIX command line, by typing:
/usr/lpp/diagnostics/bin/uspchrp -b

Configure Remote Maintenance Policy

The Remote Maintenance Policy includes modem configurations and phone numbers to
use for remote maintenance support.
Use this service aid to display and change the following settings for the Remote
Maintenance Policy.
Note: Because of system capability, some of the following settings might not be
v Configuration File for Modem on S1 Configuration File for Modem on S2
Enter the name of a modem configuration file to load on either serial port 1 (S1) or
serial port 2 (S2). The modem configuration files are located in the directory
/usr/share/modems. If a modem file is already loaded, it is indicated by Modem file
currently loaded.
v Modem file currently loaded on S1 Modem file currently loaded on S2
This is the name of the file that is currently loaded on serial port 1 or serial port 2.
Note: These settings are only shown when a modem file is loaded for a serial port.
v Call In Authorized on S1 (on/off) Call In Authorized on S2 (on/off)
Call In allows the Service Processor to receive a call from a remote terminal.
v Call Out Authorized on S1 (on/off) Call Out Authorized on S2 (on/off)
Call Out allows the Service Processor to place calls for maintenance.
v S1 Line Speed S2 Line Speed
A list of line speeds is available by using List on the screen.
v Service Center Phone Number
This is the number of the service center computer. The service center usually
includes a computer that takes calls from systems with call-out capability. This
computer is referred to as "the catcher." The catcher expects messages in a specific
format to which the Service Processor conforms. For more information about the
format and catcher computers, refer to the README file in the AIX
/usr/samples/syscatch directory. Contact the service provider for the correct
telephone number to enter here.
v Customer Administrative Center Phone Number
88
User's Guide
displayed by this service aid.