Select Language; Ok Prompt; Exiting System Management Services - IBM H80 User Manual

Select Language

Select this option to change the language used by the System Management Services
screens and the service processor menus.
Select Language
1. English
2. Francais
3. Deutsch
4. Italiano
5. Espanol
6. Svenska
===>
Note: To correctly display languages other than English, your ASCII terminal must

OK Prompt

This option provides access to the open firmware command prompt. Use the open
firmware command prompt to set up an adapter that is not configurable with the System
Management Services. Documentation supplied with an adapter may direct you to use
this option if it is needed. To exit from the open firmware command prompt, type:
reset-all
or power off the system and reboot.

Exiting System Management Services

After you have finished using the System Management Services, type x at the utilities
menu to exit the System Management Services and boot your system.
support the ISO-8859 character set.
.------.
|X=Exit|
'------'
Chapter 4. Using System Management Services
71