Safety Notices; Rack Safety Instructions; Electrical Safety - IBM H80 User Manual

Safety Notices

A danger notice indicates the presence of a hazard that has the potential of causing
death or serious personal injury. Danger notices appear on the following pages:
v x
A caution notice indicates the presence of a hazard that has the potential of causing
moderate or minor personal injury. Caution notices appear on the following pages:
v x
v xi
v 11
For a translation of the safety notices contained in this book, see the System Unit
Safety Information , order number SA23-2652.

Rack Safety Instructions

v Do not install this unit in a rack where the internal rack ambient temperatures will
exceed 40 degrees C.
v Do not install this unit in a rack where the air flow is compromised. Any side, front or
back of the unit used for air flow through the unit must not be in indirect contact with
the rack.
v Care should be taken to ensure that a hazardous condition is not created due to
uneven mechanical loading when installing this unit in a rack. If the rack has a
stabilizer it must be firmly attached before installing or removing this unit.
v This unit requires 3 amps with an input of 200-240 V ac power, or it can have -48V
dc power. Consideration should be given to the connection of the equipment to the
supply circuit so that overloading of circuits does not compromise the supply wiring
or overcurrent protection.
v An electrical outlet that is not correctly wired could place hazardous voltage on the
metal parts of the system or the devices that attach to the system. It is the
responsibility of the customer to ensure that the outlet is correctly wired and
grounded to prevent an electrical shock.

Electrical Safety

Observe the following safety instructions anytime you are connecting or disconnecting
devices attached to the workstation.
ix