Configuring Settings For Telephone And Fax Lines; Line Parameter Setting - Konica Minolta bizhub C652 User Manual

2.63 Settings under "Fax Settings"
2.63.2

Configuring settings for telephone and fax lines

Configure settings related to telephone and fax lines including the telephone dialing method, fax receive
mode, and number of incoming calls.

Line Parameter Setting

In the administrator mode of PageScope Web Connection, select "Fax Settings" ö "Line Parameter Setting".
Item
Dialing Method
Receive Mode
Number of RX Call
Rings
Number of Redials
Redial Interval
TEL/FAX Auto Switch
External TEL Calling
Monitor Sound
External TEL Calling
Time
Line Monitor Sound
Line Monitor Sound
Vol.
bizhub C652/C652DS/C552/C452 (Version 3)
Description
Select a dialing method.
Improper configuration of the dialing method may hamper a successful phone
call.
Select a receive mode.
If you select "Auto RX", faxes are received automatically.
If you expect frequent phone calls, for example if an external telephone is con-
nected to this machine, set this mode to "Manual RX".
Specify the number of quasi-ring back tone count between fax arrival and the
start of reception.
Specify the number of automatic redials when this machine cannot connect to
the destination because the line is busy.
Specify the interval of redials for automatic redialing.
Specify whether to automatically switch telephone and fax when an external
telephone is connected to this machine.
This item is displayed for Taiwan models.
Specify whether to output the telephone calling monitor sound from this ma-
chine when an external telephone is connected to this machine.
This item is available when TEL/FAX auto switching is enabled.
Specify the period from the time an incoming call is received to the time when
an external telephone is called when an external telephone is connected to this
machine.
This item is available when TEL/FAX auto switching is enabled.
Specify whether to hear the line sound from the speaker during communica-
tion.
Specify the speaker volume.
2
2-279