Konica Minolta bizhub C652 User Manual page 147

2.39 Monitoring this machine by SNMP Manager
Item
Write Community
Name
SNMP v3 Setting
Context Name
Discovery User
Name
Read User Name
Security Level
Password is
changed.
auth-password
Password is
changed.
priv-password
Write User Name
Security Level
auth-password
Password is
changed.
priv-password
Password is
changed.
Encryption Algo-
rithm
Authentication
Method
Device Name
Device Location
Administrator
Name
bizhub C652/C652DS/C552/C452 (Version 3)
Description
Enter a community name used for reading and writing (up
to 15 characters).
Set the settings for SNMP v3.
Enter a context name (up to 63 characters, excluding
space and \).
Enter a context name for detection (up to 32 characters,
excluding space and \).
Enter a user name of the read-only user (up to 32 charac-
ters, excluding space and \).
Select a security level of the read-only user.
Select this check box to change the password.
Enter the password of the read-only user for authentica-
tion (up to 8 to 32 characters, excluding space and \).
Select this check box to change the password.
Enter the privacy password of the read-only user to be
used for privacy (encryption) (up to 8 to 32 characters, ex-
cluding space and \).
Enter a user name used of the read and write-only user (up
to 32 characters, excluding space and \).
Select a security level of the read and write-only user.
Enter the password of the read and write-only user for au-
thentication (up to 8 to 32 characters, excluding space
and \).
Select this check box to change the password.
Enter the privacy password of the read and write-only user
to be used for privacy (encryption) (up to 8 to 32 charac-
ters, excluding space and \).
Select this check box to change the password.
Select an encryption algorithm.
Select an authentication method.
Enter the name of this machine (up to 255 characters).
Enter the location to install this machine (up to 255 char-
acters).
Enter the administrator name (up to 255 characters).
2
Prior check
2-127