Konica Minolta bizhub C652 User Manual page 273

2.62 Settings under "Store Address"
Item
Port No.
Limiting Access to Des-
tinations
Registering a new "User Box destination"
Item
No
Name
Index
User Box Number
Limiting Access to Des-
tinations
Registering a new "fax destination"
(This registration is available if the optional fax kit FK-502 is installed.)
Item
No
Name
Index
Fax Number
Confirm Fax Number
Line Setting
Communication Set-
ting
Limiting Access to Des-
tinations
bizhub C652/C652DS/C552/C452 (Version 3)
Description
Enter the port number.
Click [Display] to display the current settings for limiting access to destina-
tions.
Specify the access allowed level or reference allowed group required to ac-
cess this destination.
Description
Specify the registration number of the destination.
If you select "Input directly", enter the registration number.
Enter the destination name (up to 24 characters).
Select the index character used when searching for the destination.
It is convenient to select the "Main" check box for a frequently used destina-
tion.
Select the box number of the destination User Box from User Boxes registered
with this machine.
Click [Display] to display the current settings for limiting access to destina-
tions.
Specify the access allowed level or reference allowed group required to ac-
cess this destination.
Description
Specify the registration number of the destination.
If you select "Input directly", enter the registration number.
Enter the destination name (up to 24 characters).
Select the index character used when searching for the destination.
It is convenient to select the "Main" check box for a frequently used destina-
tion.
Enter the fax number of the destination (up to 38 characters).
Enter the fax number again to prevent an incorrect fax number from being reg-
istered.
This item is displayed when "Confirm Address (Register)" is "ON".
Select a line to be used.
This item is available when two optional fax kits are installed.
Click [Display] to display the current communication settings.
Select whether to enable each of "V34 OFF", "ECM OFF", "International Com-
munication" or "Check Destination".
Click [Display] to display the current settings for limiting access to destina-
tions.
Specify the access allowed level or reference allowed group required to ac-
cess this destination.
2
2-253