Using Extension Lines; Multi Line Settings - Konica Minolta bizhub C652 User Manual

2
Item
Network Fax RX Error
Report
MDN Message
DSN Message
Print E-mail Message
Body
2.63.7

Using extension lines

If two fax kit FK-502 are installed, configure settings for the second line.

Multi Line Settings

In the administrator mode of PageScope Web Connection, select "Fax Settings" ö "Multi Line Settings".
Item
Line Parameter Setting
Dialing Method
Number of RX Call
Rings
Line Monitor Sound
Function Setting
PC-FAX TX Setting
Multi Line Usage Set-
tings
Line 2 Setting
Sender Fax No.
2-292
Description
Specify whether to print reception error reports when using the network fax
function.
Specify whether to print a report when receiving the response to a MDN re-
quest.
Specify whether to print a report when receiving the response to a DSN re-
quest.
Specify whether to print the message body of an E-mail message received
successfully.
Description
Configure line parameters for the extension line.
Select a dialing method for the extension line.
Specify the number of quasi-ring back tone count between fax arrival and the
start of reception.
Specify whether to hear the line sound from the speaker during communica-
tion.
Configure settings for the extension line function.
Select the line used for PC-FAX transmission.
Configure the operation settings of Line 2 (an extension line).
Specify the communication method for Line 2 (an extension line).
You can specify TX Only, RX Only, or TX and RX only for an extension line.
Enter the sender Fax number. Usually enter the fax number of the fax machine.
The registered fax number is printed as the sender information on the fax re-
ceived by the recipient.
Settings under "Fax Settings"
bizhub C652/C652DS/C552/C452 (Version 3)
2.63