Reporting The Status Of This Machine (Trap); Tcp/Ip Settings - Konica Minolta bizhub C652 User Manual

2
2.41

Reporting the status of this machine (TRAP)

Configure settings to report the status of this machine to the administrator using the SNMP TRAP functions.
If an alarm has occurred on this machine, it can be reported to the specified IP address or IPX address by
the SNMP TRAP.
To use the SNMP TRAP functions, you must set the SNMP in advance. For details, refer to page 2-124.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.

TCP/IP Settings

2.41.1 TCP/IP Settings
Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-8.
2-132
(1) Notification to IP address
(1)
Reporting the status of this machine (TRAP)
(2) Notification to IPX ad-
dress
TRAP Settings
Status Notification Setting
Finish
bizhub C652/C652DS/C552/C452 (Version 3)
2.41
(2)
NetWare Settings