Customizing Copy Settings - Konica Minolta Bizhub 3320 User Manual

3. From the printer control panel, navigate to:
>Copy > >Copy from > select the size of the original document
4. Navigate to:
Copy to > > select the tray containing the letterhead >
enter a number on the keypad >
5. If there are no trays that contain letterhead, then do the following:
a. Navigate to:
Copy to >
b. Place the letterhead faceup, top edge first into the multipurpose feeder, and then press
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
6. Press the left or right arrow button to scroll to Finish the Job, and then press

Customizing copy settings

Copying to a different size
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the printer control panel, navigate to:
>Copy > >Copy from > select the size of the original document
4. Navigate to:
Copy to > > select a new size for the copy > select the number of copies or enter a number on
the keypad >
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
5. Press the left or right arrow button to scroll to Finish the Job, and then press
User's Guide
>Manual Feeder >
> select the number of copies or
> select the size of the letterhead >Letterhead
- 68 -
.
.
.
.
.