Konica Minolta Bizhub 3320 User Manual page 146

Use
Dial Mode
Tone
Pulse
Max Speed
2400
4800
9600
14400
33600
Custom Job scanning
On
Off
Background Removal
-4 to 4
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
-4 to 4
ADF Skew Fix
Auto
Off
On
Sharpness
1–5
User's Guide
To
Specify the dialing sound, either as a tone or a pulse.
Note: Tone is the factory default setting.
Specify the maximum speed in baud at which faxes are sent.
Note: 33600 is the factory default setting.
Scan a document that contains mixed paper sizes into a single file.
Note: Off is the factory default setting.
Adjust the amount of background visible on a scanned image.
Note: 0 is the factory default setting.
Specify the contrast in the scanned image.
Note: "Best for content" is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible.
Note: 0 is the factory default setting.
Correct the slight skew in the scanned image.
Note: Off is the factory default setting.
Adjust the sharpness of a fax.
Note: 3 is the factory default setting.
- 146 -