Konica Minolta Bizhub 3320 User Manual page 145

Use
Content Source
Black/White Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Darkness
1–9
Dial Prefix
Automatic Redial
0–9
Redial frequency
1–200
Behind a PABX
Yes
No
Enable ECM
Yes
No
Enable Fax Scans
On
Off
Driver to fax
Yes
No
Allow Save as Shortcut
On
Off
User's Guide
To
Specify how the original document was produced.
Note: Black/White Laser is the factory default setting.
Lighten or darken the output.
Note: 5 is the factory default setting.
Enter a dialing prefix, such as 99. A numeric entry field is provided.
Specify the number of times the printer tries to send the fax to a specified
number.
Note: 5 is the factory default setting.
Specify the number of minutes between redials.
Note: 3 is the factory default setting.
Enable or disable switchboard blind dialing without a dial tone.
Note: No is the factory default setting.
Enable or disable Error Correction Mode for fax jobs.
Note: Yes is the factory default setting.
Fax files that are scanned at the printer.
Note: On is the factory default setting.
Allow the printer driver to send fax jobs.
Note: Yes is the factory default setting.
Save fax numbers as shortcuts in the printer.
Note: On is the factory default setting.
- 145 -