Replace Jammed Originals If Restarting Job; Scanner Automatic Feeder Cover Open - Konica Minolta Bizhub 3320 User Manual

Replace jammed originals if restarting job.

From the printer control panel, try one or more of the following:
• Select Cancel job to clear the message and cancel the scan job. For non-touch-screen printer
models, press
• Select Scan from automatic feeder to continue scanning from the ADF immediately after the last
successful scan job. For non-touch-screen printer models, press
• Select Scan from flatbed to continue scanning from the scanner immediately after the last
successful scan job. For non-touch-screen printer models, press
• Select Finish job without further scanning to end the last successful scan job. For non-touch-
screen printer models, press
• Select Restart job to restart the scan job with the same settings from the previous scan job. For non-
touch-screen printer models, press
Replace maintenance kit, 0 estimated pages remain [80.xy]
Contact technical support or your service representative, and then report the message. The printer is
scheduled for maintenance.
Replace unsupported cartridge [32.xy]
Remove the toner cartridge, and then install a supported one to clear the message and continue printing.
For more information, see the instruction sheet that came with the supply or see the "Replacing supplies"
section of the User's Guide.
Note: If you do not have a replacement cartridge, then see the "Ordering supplies" section of the User's
Guide.
Replace unsupported imaging unit [32.xy]
Remove the imaging unit, and then install a supported one to clear the message and continue printing.
For more information, see the instruction sheet that came with the supply or see the "Replacing supplies"
section of the User's Guide.
Note: If you do not have a replacement imaging unit, then see the "Ordering supplies" section of the
User's Guide.

Scanner automatic feeder cover open

Close the ADF cover.
User's Guide
to confirm.
to confirm.
to confirm.
- 220 -
to confirm.
to confirm.