4-Loading Paper And Specialty Media; Setting The Paper Size And Type; Configuring Universal Paper Settings; Loading Trays - Konica Minolta Bizhub 3320 User Manual

4—Loading paper and specialty media
The selection and handling of paper and specialty media can affect how reliably documents print. For
more information, see Avoiding jams

Setting the paper size and type

1. From the printer control panel, navigate to:
>Settings >
2. Press the up or down arrow button to select the tray or feeder, and then press
3. Press the up or down arrow button to select the paper size, and then press
4. Press the up or down arrow button to select the paper type, and then press
settings.

Configuring Universal paper settings

The Universal paper size is a user-defined setting that lets you print on paper sizes that are not preset in
the printer menus.
Notes:
•
The smallest supported Universal paper size is 76.2 x 127 mm (3 x 5 inches), and is supported only
from the multipurpose feeder.
• The largest supported Universal paper size is 215.9 x 355.6 mm (8.5 x 14 inches), and is supported
from all paper sources.
1. From the printer control panel, navigate to:
>Settings >
select a unit of measure >
2. Select Portrait Width or Portrait Height, and then press
3. Press the left or right arrow button to change the setting, and then press

Loading trays

CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray
separately. Keep all trays closed until needed.
User's Guide
and Storing
>Paper Menu > >Paper Size/Type >
>Paper Menu > >Universal Setup >
paper.
>Units of Measure >
.
- 38 -
.
.
to change the
>
.