When Performing Auto-Save Functions Using The Standard Ups Service In Windows Server 2003/Xp/2000/Nt - Omron Powli BU50SW Instruction Manual

7
. Using the UPS monitoring software and contact signal
When performing auto-save functions using
7-3 the standard UPS service in Windows Server
2003/XP/2000/NT
When using in combination with the BUC26 cable (sold separately), the OS standard UPS service in
Windows Server 2003/XP/2000/NT can be used. When there is a power failure, the computer can be shut
down.
1. Connect the UPS to a computer.
Cable: Connection cable (BUC26), sold separately
2. Perform UPS service setup.
You need to make Windows settings in order to perform auto shutdown. There is no need to install soft-
ware.
<When using the Windows Server 2003/XP/2000 standard UPS service>
Start up the computer after connecting it with the UPS.
Perform "Log on to Windows" as the Administrator.
After logging on, follow the instructions below to set up the UPS service.
<When using the Windows Server 2003/XP/2000 standard UPS service>
Start up the computer after connecting it with the UPS.
Perform "Log on to Windows" as the Administrator.
After logging on, follow the instructions below to set up the UPS service.
42
Connect to
RS-232C
terminal
Connector
Connect to RS-232C
port on PC
Connection cable (BUC26)
Connector
Connect to
contact signal
connector on UPS