Interpreting Beeps And Displays - Omron Powli BU50SW Instruction Manual

3
. Operation
● Connection capacity/battery level meter
In normal operation, the power consumption of devices connected to the capacity/battery level
meter is displayed as a percentage.
BU50SW: Displayed in 3 levels, with 500VA/350W as 100%.
BU75SW: Displayed in 3 levels, with 750VA/500W as 100%.
BU100SW: Displayed in 3 levels, with 1000VA/700W as 100%.
BU150SW: Displayed in 3 levels, with 1500VA/1050W as 100%
When the power consumption of connected devices is 30% or less, the level meter turns OFF.
In Battery Mode, the battery level is displayed as a percentage.
Connection
capacity
Battery level
3-3

Interpreting beeps and displays

1. Displays and beeps in normal operation
(1) When power switch is OFF
Power supply
Status
No. output
indicator
lamp
1
2
3
2. Displays and beeps while testing
4
5
20
90% ON
60% ON
30% ON
All OFF
Bypass
Battery
operation
Beep
replacement
lamp
lamp
None
None
None
None
None
Connection capacity
during normal operation
90% or more
60% or more
30% or more
30% or less
Charging Description
No AC input.
OFF
Operation stopped.
There is AC input.
ON
Power switch is OFF.
Power switch is ON.
ON
Operating normally.
OFF
Self-diagnostic test in progress.
Discharging
OFF
Auto battery test in progress.
Discharging
Battery capacity dur-
ing Battery Mode
60% or more
30 to 60%
0 to 30%
—
( indicates the display is OFF)
( indicates the display is ON)
( indicates blinking)
Solution
_ _
_ _
_ _
_ _
_ _