Cleaning - Omron Powli BU50SW Instruction Manual

6
. Measuring and Inspection
2.
While pressing down on the tip of the fan connector ➀, pull it toward you to disconnect it.
The beep stops, and the error lamp turns OFF.
3.
Insert the new fan connector until it clicks into place.
The beep stops, and the "EF" status display lamp turns OFF.
4.
Insert the fan into the unit's fan recess.
Use a screwdriver to securely tighten (turn clockwise) the 3 removed screws.
When doing so, make sure the cable does not become pinned under the fan cover.
Fan replacement is complete.
6-4

Cleaning

1. Cleaning the UPS
Moisten a soft cloth with water or detergent, squeeze it tightly, and wipe the product lightly.
Do not use chemicals such as thinner and benzene. (They cause deformation or discoloration.)
2. Removing dust from the AC input plug of the UPS
Stop all the connected devices and the UPS and disconnect the AC input plug from a wall outlet (com-
mercial power).
Then, remove dust with a dry cloth and make the connection again.
(For information on the connection procedure:)
See also
"2-3 Connecting the equipment" ➛ Page 10
38
➂
● Replacement fan
BU50SW/BU75SW
BU100SW/BU150SW : Model BUF100S
➀
➁
: Model BUF75S
➁