When Performing Auto-Save Functions Using The Standard Ups Service And The Contact Signal Card (Sc07) - Omron BN50T Instruction Manual

5 To perform shutdown processing of the devices when a power failure occurs
5-3

When performing auto-save functions using the standard UPS service and the contact signal card (SC07)

5-3 When performing auto-save functions using the stand-
ard UPS service and the contact signal card (SC07)
When using the product with the optional contact signal card (SC07) and optional
connection cable (BUC26), the OS standard UPS service in Windows Server 2003/XP can
be used. When there is a power failure, the computer can be shut down.
1
. Connect the UPS to a computer.
Note: Only one computer can be connected to the UPS.
Contact signal card (SC07), sold separately Connection cable (BUC26), and sold sep-
arately
For the contact signal card loading procedure, refer to "6-2-7 Insert method of contact
signal card".
2
. Perform UPS service setup.
You need to make Windows settings in order to perform auto shutdown. There is no
need to install software.
BN50T/BN75T/BN100T/BN150T/BN220T/BN300T
5
5-7