Table of Contents
Advertisement
7-2
When performing auto-save functions using
the UPS service in Windows Server 2003/XP
+ UPS service driver
When using the included "UPS service driver", the OS standard UPS service in Windows Server 2003/
XP can be used. When there is a power failure the computer can be shut down.
1. Connect the UPS to a computer.
* Only 1 computer can be connected to the UPS
Cable: Included connection cable (RS-232C)
For the connection procedure, refer to "7-1 When using the included UPS monitoring software to
perform auto shutdown" on page 42.
2. Install the included "UPS service driver" on the computer.
Software to install: UPS service driver
How to install: Refer to the separate "UPS monitoring software installation guide".
7-3
When performing auto-save functions using
the standard UPS service in Windows Server
2003/XP
When using the product with the optional BUC26 cable, the OS standard UPS service in Windows
Server 2003/XP can be used. When there is a power failure, the computer can be shut down.
1. Connect the UPS to a computer.
* Only 1 computer can be connected to the UPS
Connection cable (BUC26), sold separately (Connect to contact signal port)
2. Perform UPS service setup.
You need to make Windows settings in order to perform auto shutdown. There is no need to install
software.
1002
BU
RW
7
44
Hide quick links:
Advertisement
Table of Contents
