Omron Powli BU50SW Instruction Manual page 48

5.
Insert a new battery into the UPS as far as it will go.
● Replacement battery pack
For BU50SW/BU75SW: Model BP70XS
For BU100SW: Model BP100XS
For BU150SW: Model BP150XS
Attach the plate cover.
Insert the lug at the bottom of the cover into the hole in the main body
➂
Use a screwdriver to securely tighten (clockwise) the 2 screws you removed.
Do not pinch the cable with the plate cover.
6.
Insert the connector until it is locked.
Secure the connector to the plate cover.
You may hear a "pop" sound when you connect the battery if it is replaced
after the unit's operation is stopped, but this sound is not abnormal.
If you cannot secure the connector to the plate cover, the connector is not
inserted completely.
Insert the connector again.
50
BU SW / BU
➀
➀
➁
75 100
SW / BU SW / BU
➁
and push it towards the main body.
➃
Tighten the 2 screws.
Secure the connector
by the 3 supports on the
plate cover.
150
SW
1
2
3
4
5
6
7
8
9
1 0
35