Connecting The Equipment - Omron Powli BU50SW Instruction Manual

2
. Installation and Connection
2-3

Connecting the equipment

(1) Disconnect the AC Input Plugs of all devices you want to back
up such as your PC and modems from a wall outlet (commer-
cial power).
(2) Connect devices you want to back up to the Power Supply
Output Receptacles of the UPS.
• If you need more output receptacles than those of the UPS,
purchase a plug strip and use it for extra output recep-
tacles.
• When using a 2-pin input plug with a grounding wire, connect the grounding wire to earth in building.
• When you want to use an AC adaptor, connect it to a Power Supply Output Receptacle of the UPS
with space enough for the connection.
(3) If you use the included UPS monitoring software or the standard UPS service of Windows NT or Windows
XP/2000 or if you use Contact Signal, connect the connecting cable between the UPS and your PC.
See also
"7. Using the UPS monitoring software and Contact Signal" on page 39
* If you do not use the UPS monitoring software and Contact Signal, this step is not required.
10
< Example of
connection 1 >
< Example of
connection 2 >
Connect it directly.
Plug of connected
device
Wall outlet
(commercial power)
PC
ø
Modem or other peripheral
External HDD
ø
Connect the plug directly.
Plug of connected
device
PC
Modem or other
peripheral
PC
Conect the grouning
wire to earth in
building.