Replacing Remote Control Batteries - Code Alarm CA1355E Owner's Manual

Replacing Remote Control Batteries

4 Button Remote Control - Model CAT4ME & CATMLEDE
The batteries inside each remote control should last approximately 1 year for the CAT4M
and 6 Months for the CATMLED under normal use. When the batteries become weak
you will notice the remote control range (the distance from the vehicle the remote control
will work) deteriorate and the small LED on the remote control will dim. Additionally, the
CATMLED will flash the LED 2 times each time a button is pressed when the battery is
low. To replace the remote control batteries:
1. Remove 1 screw then disassemble the halves of the remote
control by unsnapping the back of the case.
2. Remove the old battery, observing the +/- symbols on the
batteries and replace with a new battery.
3. Reassemble the halves of the remote control and reinstall 1 screw.
4. Test operation of the remote control.
10 ca1355E Owners revA