Replacing Remote Control Batteries - Code Alarm ca6355E Owner's Manual

Replacing Remote Control Batteries

4 Button Remote Control - Model CAT4ME & CATMLEDE
The batteries inside each remote control should last approximately 1 year for the
CAT4ME and 6 Months for the CATMLEDE under normal use. When the batteries
become weak you will notice the remote control range (the distance from the vehicle the
remote control will work) deteriorate and the small LED on the remote control will dim.
Additionally, the CATMLEDE will flash the LED 2 times each time a button is pressed
when the battery is low. To replace the remote control batteries:
1. Remove 1 screw then disassemble the halves of the remote
control by unsnapping the back of the case.
2. Remove the old battery, observing the +/- symbols on the
batteries and replace with a new battery.
3. Reassemble the halves of the remote control and reinstall 1 screw.
4. Test operation of the remote control.
16 ca6355E Owners revB