Network Settings; Copier Settings - Konica Minolta bizhub C652 User Manual

7
7.5

Network Settings

This setting is for the network operations. For details, refer to the "User's Guide [Network Administrator]".
7.6

Copier Settings

Configure the settings used by the copy functions.
%
Press the [Utility/Counter] key ö [Administrator Settings] ö [Copier Settings].
Settings
Auto Zoom (Platen)
Auto Zoom (ADF)
Specify Default Tray when
APS Off
Select Tray for Insert Sheet
Print Jobs During Copy
Operation
Tri-Fold Print Side
Automatic Image Rotation
Copy Card Settings
7-46
Configure whether Auto Select is automatically selected when a paper tray
is selected manually while an original is placed on the original glass.
Configure whether Auto Select is automatically selected when a paper tray
is selected manually while an original is placed in the ADF.
Configure which paper tray to be selected when the APS (Auto Paper) set-
ting is canceled.
Tray Before APS ON Uses the paper tray specified before the APS was
selected.
Default Tray Uses Tray 1.
Configure the default paper tray loaded with paper for the cover pages
(front cover), inserted sheets and the chapter title pages.
Configure whether to accept print data or fax data while a copy operation
is being performed.
Accept Accepts print data or fax data to print.
Receive Only Prints print data or fax data after the copy opera-
tion is finished.
Configure whether the printed side is on the inside or the outside when the
page is folded in three.
This function is enabled when the finisher FS-526 and Saddle Sticher
SD-508 are installed.
When the original orientation is different from paper orientation, the image
is rotated depending on the setting. Configure when the image is automat-
ically rotated.
Register card copy setting.
If [Card Copy] is selected in [Application], the function can be invoked with
the registered setting.
Layout Specify where to place the front and back sides
of a card.
Zoom Specify to copy a card with the full size or enlarge
an image to fit paper.
Store Original Size Change and register the pre-specified original
size or [Original Name].
Network Settings
bizhub C652/C652DS/C552/C452 (Version 2)
7.5