Konica Minolta bizhub C652 User Manual page 272

10
12
Click the [Write].
% Data Administrator provides the batch copy function that batch-configures the registered user data
in multiple machines with the authentication unit enabled.
The registered user data is configured in this machine.
13
Click the [OK].
14
Disconnect the authentication unit from the USB port of the computer.
15
Turn the main power switch of this machine off, connect the authentication unit to this machine, and
turn the main power of this machine on.
NOTICE
To turn the main power switch off and on, first turn the main power switch off, and then turn it on after
10 or more seconds has elapsed. Not doing so may result in an operation failure.
When connecting or disconnecting the USB cable, hold the plug. Otherwise, the cable may be
damaged.
10-18
Using an authentication unit (biometric type)
bizhub C652/C652DS/C552/C452 (Version 2)
10.1