Konica Minolta bizhub C652 User Manual page 270

10
8
Place your finger on the authentication unit, and then click the [Start Reading].
% Scan the finger vein patterns three times; reset the same finger and then press [Start Reading] for
each scanning.
% After scanning the finger vein patterns, place the same finger, and click [Authentication Test].
% If the authentication test has succeeded, press [Register].
% If the authentication test has failed, place your finger on the authentication unit again, and click
[Authentication Test].
% If the authentication has failed, click [Reset] to repeat the scanning process.
For authentication unit AU-101
For authentication unit AU-102
9
Click the [Registration].
10-16
Using an authentication unit (biometric type)
bizhub C652/C652DS/C552/C452 (Version 2)
10.1