10-34
Vehicle Care
Headlamps, Front Turn
Signal and Parking
Lamps
Base Headlamp Assembly
The base model vehicle has a
halogen high-beam headlamp,
a low-beam/Daytime Running
Lamp (DRL) headlamp, and a
turn signal/parking lamp on the
headlamp assembly.
To replace one of these bulbs:
1. Open the hood. See Hood on
page 10 5.
A. Low-Beam Headlamp/DRL
B. High-Beam Headlamp
C. Parking/Turn Signal Lamp
2. If replacing a headlamp bulb,
remove the dust cover from the
back of the headlamp housing
by turning counterclockwise
one quarter turn.
I n f o r ma t i o n P r o v i d e d b y :
3. Remove the bulb socket
from the headlamp by
turning counterclockwise
one quarter turn.
4. Remove the bulb from the
socket. If replacing the
high/low beam bulb, pry the
two clips on either end of the
bulb and pull straight out.
5. Install the new bulb in the
socket.