Table of Contents
Advertisement
Connecting to a Different Phone
To connect to a different cell phone,
the Bluetooth system looks for the
next available cell phone in the
order in which all the available cell
phones were paired. Depending
on which cell phone you want to
connect to, you may have to use
this command several times.
1. Press
. For vehicles with a
navigation system, say Hands
Free after the tone.
2. Say Bluetooth.
3. Say Change phone.
If another cell phone is
found, the response will
be <Phone name> is now
connected.
If another cell phone is not
found, the original phone
remains connected.
Storing and Deleting Phone
Numbers
The system can store up to
30 phone numbers as name tags
in the Hands Free Directory that is
shared between the Bluetooth and
OnStar systems.
The following commands are used
to delete and store phone numbers.
Store: This command will store
a phone number or a group of
numbers as a name tag.
Digit Store: This command allows
a phone number to be stored as a
name tag by entering the digits one
at a time.
Delete: This command is used to
delete individual name tags.
Delete All Name Tags: This
command deletes all stored
name tags in the Hands Free
Calling Directory and the OnStar
Turn by Turn Destinations Directory.
I n f o r ma t i o n P r o v i d e d b y :
Infotainment System
Using the Store Command
1. Press
. For vehicles with a
navigation system, say Hands
Free after the tone.
2. Say Store.
3. Say the phone number or group
of numbers you want to store
all at once with no pauses, then
follow the directions given by the
system to save a name tag for
this number.
Using the Digit Store Command
If an unwanted number is
recognized by the system, say
Clear at any time to clear the
last number.
To hear all of the numbers
recognized by the system,
say Verify at any time.
1. Press
. For vehicles with a
navigation system, say Hands
Free after the tone.
2. Say Digit Store.
7-55
Advertisement
Chapters
Table of Contents
