Table of Contents
Advertisement
Power Seat Adjustment
To adjust a power seat:
Move the seat forward or
rearward by sliding the control
forward or rearward.
Raise or lower the front or rear
part of the seat cushion by
moving the front or rear of
the control up or down.
Raise or lower the entire seat
by moving the entire control up
or down.
Memory Seats
On vehicles with the memory
feature, the 1 and 2 buttons
on the outboard side of the driver
seat are used to manually save
and recall the driver seat and
outside mirror positions. These
manually stored positions are
referred to as Button Memory
positions.
I n f o r ma t i o n P r o v i d e d b y :
Seats and Restraints
The vehicle will also automatically
save driver seat and outside
mirror positions to the current
driver Remote Keyless Entry (RKE)
transmitter when the ignition is
placed in OFF. These automatically
stored positions are referred
to as RKE Memory positions.
See Remote Keyless Entry (RKE)
System Operation on page 2 4
for more information.
Storing Button Memory Positions
To save positions into Button
Memory:
1. Adjust the driver seat, seatback
recliner, and both outside mirrors
to the desired driving positions.
2. Press and release the
MEM (Memory) button.
3. Press 1 until a beep sounds.
4. Repeat Steps 1 through 3 for a
second driver using 2.
3-5
Advertisement
Chapters
Table of Contents
