Table of Contents
Advertisement
3-24
Seats and Restraints
Shoulder Belt Height Adjuster
The vehicle has a shoulder belt
height adjuster for the driver and
right front passenger seating
positions.
Adjust the height so the
shoulder portion of the belt is
on the shoulder and not falling
off of it. The belt should be close
to, but not contacting, the neck.
Improper shoulder belt height
adjustment could reduce the
effectiveness of the safety belt in
a crash. See How to Wear Safety
Belts Properly on page 3 17.
Press the release button (A) and
move the height adjuster to the
desired position. The adjuster
can be moved up by pushing the
slide/trim up. After the adjuster is
set to the desired position, try to
move it down without pushing the
release button to make sure it has
locked into position.
I n f o r ma t i o n P r o v i d e d b y :
Safety Belt Pretensioners
This vehicle has safety belt
pretensioners for front outboard
occupants. Although the safety
belt pretensioners cannot be seen,
they are part of the safety belt
assembly. They can help tighten
the safety belts during the early
stages of a moderate to severe
frontal and near frontal crash if
the threshold conditions for
pretensioner activation are met.
Pretensioners work only once. If the
pretensioners activate in a crash,
the pretensioners and probably
other parts of the vehicle's safety
belt system will need to be replaced.
See Replacing Safety Belt System
Parts After a Crash on page 3 28.
Advertisement
Chapters
Table of Contents
