Lighting Features; Entry Lighting; Exit Lighting; Battery Load Management - Buick LaCrosse 2011 Owner's Manual

Hide thumbs Also See for LaCrosse 2011:
Table of Contents

Advertisement

6-6
Lighting

Lighting Features

Entry Lighting

The headlamps, taillamps, license
plate lamps, back up lamps, dome
lamps, and most of the interior lights
turn on briefly, when the Remote
Keyless Entry (RKE)
button is
pressed, or when the door handle is
pulled on a keyless access vehicle.
See Ignition Positions (Key Access)
on page 9 17 or Ignition Positions
(Keyless Access) on page 9 19.
After about 30 seconds the exterior
lamps turn off, and then the dome
lamps and remaining interior lights
will dim to off. Entry lighting can be
disabled manually by changing the
ignition out of the OFF position,
or by pressing the RKE
This feature can be changed.
See Vehicle Personalization on
page 5 39.

Exit Lighting

The headlamps, taillamps, parking
lamps, back up lamps, and license
plate lamps come on at night, or in
areas with limited lighting, when the
key is removed from the ignition.
The dome lamps also come on
when the key is removed from the
ignition. The exterior lights and
dome lamps remain on after the
door is closed for a set amount of
time, then automatically turn off.
For a vehicle with keyless access,
the exterior lights and dome lamps
automatically turn on when a door
is opened after the ignition is turned
off. See Ignition Positions (Key
Access) on page 9 17 or Ignition
Positions (Keyless Access) on
page 9 19.
button.
The exterior lights turn off
immediately by turning the
exterior lamps control to OFF.
This feature can be changed.
See Vehicle Personalization on
page 5 39.
I n f o r ma t i o n P r o v i d e d b y :
Battery Load
Management
The vehicle has Electric Power
Management (EPM) that estimates
the battery's temperature and state
of charge. It then adjusts the voltage
for best performance and extended
life of the battery.
When the battery's state of charge
is low, the voltage is raised slightly
to quickly bring the charge back up.
When the state of charge is high,
the voltage is lowered slightly to
prevent overcharging. If the vehicle
has a voltmeter gauge or a voltage
display on the Driver Information
Center (DIC), you may see the
voltage move up or down. This is
normal. If there is a problem, an
alert will be displayed.

Advertisement

Table of Contents
loading

Table of Contents