Headlamps, Front Turn Signal And Parking Lamps - Buick 2016 LaCrosse Owner's Manual

Headlamps, Front Turn
Signal and Parking
Lamps
Base Headlamp Assembly
The base model vehicle has a
halogen high/low-beam headlamp,
parking lamp, and a turn signal lamp
on the headlamp assembly.
For replacement of the turn signal
lamp bulb on an eAssist vehicle,
contact your dealer.
1. Headlamp
2. Turn Signal Lamp
To replace one of these bulbs:
1. Open the hood. See Hood
0 230.
2. If replacing a headlamp bulb,
remove the dust cover from the
back of the headlamp housing
by turning counterclockwise
one-quarter turn.
3. If replacing a turn signal lamp
bulb on a non-eAssist vehicle,
remove the close out panel
push pins and close out panel
covering the bulb socket.
4. Remove the bulb socket from
the headlamp by turning
counterclockwise
one-quarter turn.
5. Remove the bulb from the
socket. If replacing the high/
low-beam bulb, pry the two
clips on either end of the bulb
and pull straight out.
6. Reverse Steps 1 5 to install.
Uplevel Headlamp Assembly
The uplevel model vehicle has a
high intensity discharge (HID) high/
low beam, DRL/parking lamp, and a
Vehicle Care
turn signal lamp on the headlamp
assembly. See High Intensity
Discharge (HID) Lighting 0 254.
To replace the turn signal bulb:
1. Open the hood. See Hood
0 230.
2. Turn the bulb socket
counterclockwise to remove it
from the headlamp assembly.
3. Pull the bulb straight out from
the socket.
4. Reverse Steps 1 3 to install.
255