Date And Time - Comtech EF Data HPOD Installation And Operation Manual

HPOD C, X-, or Ku-Band High-Power Outdoor Amplifier
Ethernet-based Remote Product Management
4.5.5.3.2 Config | Utility Page
Use this page to configure HPOD operating parameters.
At any time, click [Refresh] to update this page and see the most recent data.

Date and Time

Enter the Date and/or the Time:
Field
Date (MM/DD/YY)
Time (HH:MM:SS)
Click [Change Date/Time] to save the settings.
Circuit ID
Enter a Circuit ID string of up to 48 characters. Click [Change CID] to save the string.
Current SC/13320 Active Firmware Image # (read-only)
This example identifies Image 1 as the Current Active Firmware Image.
Next Reboot Image – Use the drop‐down list to select the Next Reboot Image as 1 or 2, and
then click [Submit] when done.
Figure 4-7. Config | Utility page
Format Minimum Value
Month 01
Day 01
Year 00
Hours 00
Minutes 00
Seconds 00
4–19
Maximum Value
12
31
99
23
59
59
Revision 6
MN/HPOD.IOM