HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier
Appendix B
B.2
Redundancy Operation Using the HPOD Web Server Interface
See Chapter 4. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT for
detailed information about using the HPOD Web Server interface.
To proceed with Ethernet‐based Remote Product Management, assumptions are
made that:
•
The HPOD is operating with the latest version firmware files.
•
The HPOD is connected to a user‐supplied Windows‐based PC as follows:
•
The HPOD's IP Address has been noted using the HPOD serial or Telnet remote
'FRW' query or using the HPOD Web Server Interface 'Admin | Access' page.
B.2.1
HPOD Web Server Interface Overview
To use the HPOD Web Server Interface:
•
Open a compatible Web browser.
•
Enter the HPOD IP Address into the browser Address field (default is http://192.168.1.4)
•
Enter a valid user name / password (default is comtech / comtech). The HPOD Web
Server Interface 'Home' page appears upon successful login:
o The PC's Ethernet port is connected to the HPOD 'J6 | COM1' port with a
190‐pin to RJ‐45 adapter cable.
o The PC is running a terminal emulation program (for operation of the
HPOD remote control Telnet interface) and a compatible web browser
(for operation of the HPOD Web Server Interface).
B–5
Revision 6
MN/HPOD.IOM