The Clock - Rangemaster Professional+ 110 Dual Fuel User's Manual & Installation Instructions

Hide thumbs Also See for Professional+ 110 Dual Fuel:
Table of Contents

Advertisement

Fig.2-21
ArtNo.300-0004 2-button clock annotated
A
A – Timer knob, B – Adjusting knob
ArtNo.300-0005 2BC
Fig.2-22
minute minder setting
Fig.2-23
ArtNo.300-0006 2BC
minute minder setting 2
ArtNo.301-0007 2BC
Fig.2-24
Stopping the oven 1
Fig.2-25
ArtNo.301-0008 2BC
Stopping the oven 2
ArtNo.301-0009 2BC
Fig.2-26
Setting the cooking timer
Fig.2-27
ArtNo.301-0010 2BC
Setting the cooking time

The Clock

You can use the clock to turn the right-hand oven on and o .
The clock must be set to the time of day before the oven
will work.
The 2-button Clock
Setting the Time of Day
The 2-button LCD clock is shown in (Fig.2-21). When the
clock is rst connected, the display ashes ( 0.00 ) and (
B
alternately.
To set the time, turn and hold the Timer knob to the clock
symbol [
or right until the clock shows the time of day. Remember this
is a 24-hour clock. Let go of the Timer knob and it will spring
back to the vertical, oven manual setting.
IMPORTANT: The programmable oven will not operate
unless the clock has been set.
Setting the Minute Minder
To activate the minute minder turn the Timer knob to the
right to the [
position (Fig.2-22).
Rotate the Adjusting knob to set the time required (Fig.2-23).
You can either turn the knob back to the vertical manual
setting [
the [
To stop the beeper when it sounds, turn the Adjusting knob
counter-clockwise.
To Stop the Oven at a Speci c Time of Day
Turn the Timer knob to the [
Use the Adjusting knob to set the 'stop time'. You can set
the oven to turn on at any time over the following 24-hour
period. AUTO shows in the display (Fig.2-25).
Turn the Timer knob to the bottom 'AUTO' setting to return to
the clock display.
Once the 'stop time' is reached, the beeper sounds. Turn the
Timer knob to the vertical [
To Start and then Stop the Oven Using the Timer
You cannot set a start time directly – this is set automatically
by a combination of the 'cook period' and 'stop time'.
Turn the Timer knob to the [
Turn the Adjusting knob to set the 'cook period' you need
(Fig.2-27).
8
(Professional+
] and at the same time turn the Adjusting knob left
] minute minder setting – it should click into
] to keep an eye on the time of day, or leave it in
] minute minder position as the time ticks down.
The 'cook period', which is the length of time you
want the oven to cook for.
The 'stop time' , which is the time of day you want the
oven to stop cooking.
)
] position (Fig.2-24).
] to return to manual cooking.
] position (Fig.2-26).
)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents