Datalogic™ Magellan
Scan the following Plug and Play code to program the scanner for a Datalogic Magellan auxiliary port configuration. This bar
code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
NCR Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scanner for an NCR bioptic scanner auxiliary port configuration. The fol-
lowing prefixes are programmed for each symbology:
Wincor Nixdorf Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf terminal. This bar code sets the baud rate
to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
Wincor Nixdorf Beetle™ Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf Beetle terminal. The following prefixes are
programmed for each symbology:
2 - 6
®
Aux Port Configuration
Datalogic Magellan Settings
Symbology
Prefix
UPC-A
A
UPC-E
E0
EAN-8
FF
EAN-13
F
NCR Bioptic Settings
Wincor Nixdorf Terminal Settings
Symbology
Prefix
Code 128
K
Code 93
L
Codabar
N
UPC-A
A0
UPC-E
C
EAN-8
B
Wincor Nixdorf Beetle Settings
Symbology
Prefix
Code 39
B1
Interleaved 2 of 5
B2
All other bar
B3
codes
Symbology
Prefix
EAN-13
A
GS1-128
P
Interleaved 2 of 5
I
Plessey
O
Straight 2 of 5 IATA
H
All other bar codes
M